Control Panel

Meter DBControl Panel is a component of an electricity supply system that divides an electrical power feed into subsidiary circuits while providing a protective fuse or Meter for each circuit in a common enclosure. These are the final switchboards (In electrical wiring & installation) and are located at small electrical loads switching areas including lighting, air conditioners, small motors switching, distribution boards for plugging portable devices like blowers, etc. We can also observe these LDBs in our homes and offices as they are employed in low switching operations. LDBs consist of various MCBs where each MCB acts as a switch for individual loads (some cases two or more lights can be connected to single MCB). These MCBs protects the loads against overload as well as short circuit conditions. These MCBs are mounted or fixed to the metal racks. These boards receive the power from PDBs and then supplies to the lighting loads. Mostly these are of wall mounted type boards.

• Item Code: mtr12
• Production Capacity: 5
• Delivery Time: 7-8 days
• Packaging Details: paper packing each

We are offering L T Distribution Control Panel. The equipment comprises outdoor, open space power panels and comes with an electrical circuit breaker that makes these suitable for the electrical motor, generators, submersible pump/motor testing and other areas. Also coming with compact and intelligent power panel device, these support requirements of automating small to mid-sized machines and systems and also fall in compliance with all international standards.

Features:

• Equipment comprises outdoor, open space power panels
• System comes with MCCB/electrical circuit breaker depend upon LOAD
• Suitable for electrical motor, generators, submersible pump/motor testing and other areas
• Comes with compact and intelligent power panel device
• Supports requirements of automating small to mid-sized machines and systems
• Systems fall in compliance with all international standards
• Also suitable for various industries like engineering, automotive, refineries, chemicals, and others

• Production Capacity: as per requirement
• Delivery Time: 2-3 days
• Packaging Details: Carton of good quality

We are offering SUBTECH DOL MOTOR STARTER.

FEATURES:

• Microcontrollers based technology
• Auto/manual/bypass mode sselect switch
• Status LED Indication, start delay time
• Continuous running capacity: 100+hrs
• Inbuilt MCB/MCCB 
• Wide Voltage range: 170-450 VAC
• Fabricated with powder coated GI sheet

PROTECTION:

• Over/Under voltage (use set)
• Overload(use set)
• Single phasing
• Reverse phasing
• Phase Unbalance
• (Dry run feature on request)

• Item Code: DOL10hp
• Production Capacity: 50 unit per day
• Delivery Time: 3-4 working days
• Packaging Details: Packing in a single pc paper box

Single phase and phase reversal protection.Over Voltage / Under Voltage Protection.Over Load / Under Load Protection. MCB/MCCB for Short Circuit Protection.Heavy Duty DMC Connection Terminal.PMC Contactor for smooth switching.Dry Run Protection (optional).

• Item Code: 5556
• Production Capacity: 1000
• Delivery Time: 8-10

GPRS/GSM based Centralized Controlling & Monitoring System for water pumps according to level of water tank with Electric actuator & butterfly valve, cubical Panel fabricated with 1.6 / 2mm thick CRCA/GPSP sheet, suitable for 415volt 50Hz AC complete with control wiring of starter for pumps with Auto-phase sequence corrector and having provision of auto & manual control over, duly powder coated floor /wall mounted type complete with necessary switchgear/ accessories, Micro Processor based RF Module, Transponder / Repeater, GSM Module for SCADA software and tablet/LCD display of water level via Liquid Pressure Transducer.

• Item Code: 031
• Production Capacity: 2
• Delivery Time: 30 DAYS
• Packaging Details: Wooden packing

Operating Volt: 140- 280 VAC (P-N)Contactor coil activates only for 1 secAutomatic load transfer among Mains and gensetAuto Start/Auto Stop the Genset when Mains fails/restoresMains input: 3 phase, Gen input: 3 phaseLED Indications for mains (R-Y-B), gen ON, load ON, mode & faultMinimum changeover time to protect sensitive equipmentMains restore delay time: 5 sec, Cranking time: 3-5 sec., Cool down time: 10 secGen output delay time: 8-10 sec, 3 cranking attempts for genset with 15 sec intervalsMicrocontrolled based system with Electrical interlockingAudio visual alarm on common Genset faultsSoft button for Auto/Manual mode selection, manual start/stopBattery charger inbuiltCompatible for new electronic controller based and old key type genset as well.Three pole and Four pole availableCurrent rating 63 Amp. to 150 Amp., suitable for upto 63kVA gensetFabrication: Powder Coated GI Box, Wall mounting, compact sizeWorks well on low / high voltages, no chattering or coil burning, smooth switchingLong life and maintenance freeHeavy duty DMC connection terminal blockScrew tight connection for 63 A. and ring type thimble for 100 and 150 A.Provision for Remote operation (auto/manual, start/stop)

• Production Capacity: 1000
• Delivery Time: 8-10
• Packaging Details: As per ready stock

SUBTECH make Three Phase submersible control panel are suitable for all kinds of Submersible / motors & are available in threetypes: AGRI, AGRI+ & PRIMEType >>Features >> PrimeOperationFully automatic digital submersible/motor control panelWith MPU Controller, Microcontroller based technologyAuto/manual/bypass mode selector switch,Start & Stop soft buttons, Start delay timeTechnical spec Wide operating Voltage range: 240-480 VACContinuous running capacity: 100+ hrsDisplay Volt and Amp. Volt, Amp, Run hr Volt, Amp, Run hrLED Indication s Status : R - Y - B Phases, Healthy Power,Faults : Phase fail, Rev Phase, Unbalance V, Over/Under V, OverloadSingle Phasing cut-o ff ✓ ✓ ✓Reverse Phasing cut-o ff ✓ ✓ ✓Phase Unbalance cut-off (~60 V) ✓ ✓ ✓Over & Under voltage cut-off fixed fixed Site settable (by soft switch)Overload cut-off Site settable (by knob) Site settable (by knob) Site settable (by soft switch)Dry run ✘ ✘ ( o p tio nal)MCB/MCCB ✘ ✓ ✓Remote trip ✘ ✘ ( o p tio nal)Contactor PMC Contactor for smooth, fast (No chattering or coil burning problem)(5 years warranty on contactor’s coil against burning)Body Rust-free GPSP Sheet, Wall mounting, compact s izeConnection Heavy duty DMC connection terminals for input and outputScrew tight connection (smaller rating), ring type thimble (higher rating)Connecting wire s Optional (1 mtr Copper wire for RYB input supply)

• Item Code: 5060
• Production Capacity: 50 unit / day
• Delivery Time: 3-5

In present era power network is going through a wide variety of electrical load which creates a varying power demand in the power supply system. So in this varying condition of electrical load, it’s very difficult to maintain a constant power factor by the use of fixed capacitors bank to be manually switched on/off to suit the variation of Electrical load. As far as industrial load concern heavy inductive load is very common which will result in Low power factor. Low power factor results in higher demand charges and also of low power factor penalties. It is, therefore, necessary to the automatic switching operation of the suitable capacitor bank for fixing power factor from load fluctuation.

• Item Code: LTPANEL
• Production Capacity: 4-5
• Delivery Time: 4-5 days
• Packaging Details: wooden packing & paper